Adhesive Film for Stainless Steel Plate Drawing
D Series
About the product
Resonac’s adhesive protection D Series film used for the drawing process of stainless plates also provides greater convenience in deep drawing of sinks or bathtubs.
Inquiry of this product
Merits
- Excellent workability helps neatly finish deep drawing of sinks or bathtubs without the film coming off during the process.
- Easy to remove without leaving adhesive residue, even after deep drawing.
- Leaves minimal fish eyes or contaminants, and avoids causing dents or other troubles during drawing.
- Applicable to various stainless plates with an extensive product lineup of different adhesive strengths.
Characteristics
Product number |
Grade | Standard adhesion | Composition | Dimensions | Color | |||||
cN/25mm | Adherend | Base film | Adhesive compound | Width (Min-Max:mm) |
Length (Min-Max:m) |
Base film thickness (μm) |
Colorless | Pale-blue | ||
D-5700 | D-5740 | 100 | Stainless | Special PP | Acrylic | 400-1500 | 200-1000 | 40 | ● | ● |
D-5750 | 140 | |||||||||
D-5755 | 180 | |||||||||
D-5760 | 220 | |||||||||
D-5765 | 280 | |||||||||
D-5770 | 340 | |||||||||
D-7700 | D-7730 | 300 | Stainless | Special PP | Acrylic | 400-1500 | 200-1000 | 40 | ● | ● |
- ※Standard adhesion indicates measured values at a peeling angle of 90 degrees, peeling speed of 200 mm/minute, and temperature of 23℃.
- ※Please consult us about your size requirements (width, length).
Catalogues & Product Information Download
Inquiry of this product